You are here: Encyclopedia > P > Part Voicing

Part Voicing

Occasionally, more than one voice appears in the same score staff (e.g. “Flutes 1 & 2” or a divisi section). If this is the case, you may want to print separate parts, for example, one for “Flute 1” and another for “Flute 2.” Finale can help you hide notes to isolate a single voice in preparation for printing the part.

There are nuances to part voicing which make it impossible for Finale to guess entirely which notes you want to include. In multi-part staves, markings like a2 signify both instrumentalists should perform a monophonic section in unison. Finale cannot interpret these markings to decide which notes belong to the voice and which should be removed like the Process Extracted Parts plug-in can. However, with the help of Staff Styles, parts can be modified so that only a single voice is showing while the link to the score is retained. (The Process Extracted Part plug-in requires the part to be extracted into another autonomous document).

When specifying part voicing, bear in mind note attached items attached to one layer cannot be copied automatically to another layer. Also, the following data is removed from voiced parts:

Note. Note the Simple Entry, Speedy Entry, HyperScribe and Note Mover tools are disabled for the part once voicing is applied. You can, however, edit notation of these parts by working with the notation of corresponding staves in the score.

To generate a single-voice part from a multi-voice score staff:

  1. Choose Document > Manage Parts. The Manage Parts dialog box appears.

We will now create a new part definition and add the multi-part staff to this new part (a staff can be added to more than one part). To this new part we will apply voicing settings that will isolate one of the voices.

  1. Choose New Part > Edit Part Name. Type the name of the part and click OK. The new part appears in the left list and is automatically selected.
  2. Select the multi-voice instrument staff from the list on the right and click Add to Part to add it to the part. The staff moves to the center column.
  3. Click to select the staff you just added to the middle column.
  4. Click the Edit Voicing button to open the Voicing for Staff in Part dialog box.

Here, you will first eliminate the majority of extra notes by specifying the layer or chord position in which most notes in the voice currently appear. The method you will use depends on how the voices are delegated in the part. For example, if Flute 1 uses layer 1 all of the time, select the All Notes in Layer _ radio button and from the drop-down menu and choose Layer 1 to display layer 1 notes only.

However, in many cases, a single layer will be used to indicate two or more players should play in unison. For example, let’s say there is a tutti section in the middle of this part, where layer 1 is used for both Flutes 1 & 2.

  1. Click Selected Notes from One or More Layers.
  2. Choose the option that most closely describes the vertical position of this voice. For example, if your part is filled with two-note divisi sections, and this is the Violin 2 part, choose Bottom Note. If there are more than two voices, choose Selected Note(s) to indicate the note within chords of a triad or greater to display.

Note. As you add or remove notes while isolating voices, articulations may remain on the incorrect side of the staff. To set articulations to automatically flip to the appropriate side of the staff as notes/layers are added/removed, set them to Auto Note/Stem Side under the Position drop-down menu of the Articulation Designer dialog box. (You may have to remove manual positioning to see the effects of this setting (select the articulations(s) and press BACKSPACE).)

  1. When you have configured this dialog box to represent the majority of notes in the layer you would like to display, click OK. For more information, see Voicing for Staff in Part dialog box. You return to the Manage Parts dialog box.
  2. Click OK. It is likely that there are some measures in the part containing extra notes. You can use a Staff Style to hide these sections.
  3. Choose the Staff tool image\Staff_Tool.gif. If you would like to hide notes from partial measures, make sure Edit > Select Partial Measures is checked.
  4. Highlight the sections containing extra notes. Right-click the highlighted area and choose Blank Notation with Rests. The staff style replaces notes in that layer with rests (see below). This staff style does not hide measure attached items such as hairpins, smart shapes, or expressions, but will hide note attached items such as slurs. For more about Staff Styles, see Staff styles.

 

 

User Manual Home