You are here: Reference > Dialog Boxes > P > Playback and/or Click dialog box

Playback and/or Click dialog box

How to get there

  1. Click the HyperScribe tool  image\HyperScribe_Tool.gif. The HyperScribe menu appears.
  2. Choose HyperScribe > Beat Source > Playback and/or Click.

What it does

Use the Playback and/or Click dialog box to set the recording tempo, to define a start signal for recording, and to select whether staves play back while Finale records your performance.

Note. Finale will not play back staves if either Tap or External MIDI Sync is selected in the Beat Source submenu.

Note. The Start Signal for Recording setting is used only when you’re recording (and Playback and/or Click is selected in the Beat Source submenu), not when you’re playing back your music.

Tip. Record at a slower tempo if you don’t warm up on Chopin Nocturnes. Start Signal for Recording can be identified from a list of MIDI events or none at all (when you click in the measure Finale will be counting off).

 

See Also

HyperScribe menu

Click and Countoff

HyperScribe Tool

 

 

User Manual Home